Clear water blending paint is more environmentally friendly, healthy home purity. Refined with international advanced environmental protection formulations and technology, it is made with clear water blending paint, non-toxic and non-irritating odour, creating an environmentally healthy and comfortable home environment.

Product features:

● Clear water blending, non-toxic and non-irritating odour

● Large painting area, excellent construction performance

● The paint film is rich and delicate to the touch, making your home shine for a long time.

Construction methods:

Brush or spraying, thin coating is suitable, the last top coat requires spraying.

Product matching:

A product that can be used in combination with a primer to obtain the desired effect.

Theoretical painting area:

Varnish: 1520 sqm Kg single coat (main agent)

White paint: 12-15 sqm Kg/single coat (main agent)

The actual painting area varies depending on the construction method, surface roughness and construction environment

Construction conditions:

Temperature above 8℃, humidity below 80%, and good ventilation.

Dilution ratio:

(weight ratio) paint: water = 100:20, mix well and leave to stand until the bubbles disappear.

Construction method:

Brush or spray can be used, thin coating is suitable, the last top coat requires spraying.

Standard process:

Substrate treatment, the surface of the substrate must be dry and stain-free and sanded smooth.

Interval between layers: each time after drying, sandpaper should be used to smooth the surface before recoating. The general interval between layers is 8 hours, which varies with the climate and environment, subject to dryness until the sandpaper does not stick.

Tool tip:

New brushes should be soaked in washing powder or soapy water and then cleaned with water before use; do not use brushes with animal hair to apply water-based wood paint.

Construction methods and techniques:

Brush or spray (need to adjust the diluent ratio appropriately), before use, please strictly according to the proportion of mixing and stir well, after the preparation of paint, please stand for about 15 minutes, after the disappearance of air bubbles, it is recommended that the top coat with 200-300 mesh / primer with 80-100 mesh filter cloth filter after the use of the recommended construction order for the three bottom two sides, can also be adjusted according to actual needs, such as two bottom three sides, etc.; adjusted paint recommended within 4 hours with The used tools should be cleaned with thinner immediately after use.

Safety precautions:

● Please read the instructions on the packaging and label carefully before use to obtain a reliable and satisfactory finish.

● Open all doors and windows as far as possible before starting and using the product to ensure adequate ventilation of the area.

● If you have allergic skin, wear protective equipment at all times; if you get into the eyes, rinse immediately with plenty of water and seek medical attention.

● Do not allow children or pets into the work area and store out of their reach; in case of accidental contact rinse immediately with plenty of water and seek medical attention.

● To ensure the desired finish, please effectively separate, cover and mask the area between the woodwork and the wall, to better maintain the cleanliness of the work site and to avoid confusing work operations, please follow the sequence of applying the woodwork first and then the emulsion paint after it has dried.