The selection of high-quality raw materials, the use of advanced formulations, is to protect and beautify the situation of cost-effective decorative goods.

Features:

● Fresh smell

● Strong hiding power

● Lasting bright; Scrubbing resistance

● Smooth paint film

● Good adhesion

● Excellent stain resistance

Construction method:

This product can be brush coating, roll coating, airless spraying

Use:

Widely used in concrete, cement mortar, brick wall, ceiling and other indoor base decoration and protection.

Theoretical paint consumption:

10-14 square meters/liter/single pass (the actual coating area is different due to the roughness and drying degree of the substrate surface, construction method and dilution ratio, coating rate is also different).

Construction technology:

● New wall: batch putty twice (grinding, cleaning)→ anti-alkali primer once (grinding, cleaning)→ top paint twice;

● Old wall: mildew removal, grinding, cleaning → alkali resistance primer once (grinding, cleaning)→ top paint twice.

Construction instructions:

● The new wall should be dry, the moisture content is less than 6%, the PH value is less than 10, the use of the company's anti-alkali primer (can be diluted with the right amount of water mixing) for appropriate bottom coating treatment. Then use the top paint (add an appropriate amount of water to dilute and mix well) to brush twice, and the interval of recoating shall not be less than 2 hours. Do not operate when the ambient temperature is lower than 5 ° C or the relative humidity is greater than 85%.

● During the construction of the old wall, it is necessary to ensure that the wall and putty have higher strength (not loose), otherwise it is easy to cause depowder, cracking, peeling, poor leveling, poor water resistance and other defects.

Safety matters:

● Please be sure to carefully read the construction instructions in the product packaging and label before use, in order to obtain reliable and satisfactory coating effect;

● Open all doors and Windows as far as possible before operation and use to ensure adequate ventilation in the construction area;

● In case of allergic skin, please always wear protective equipment during use; In case of eye contamination, rinse immediately with plenty of water and seek medical assistance.

● Keep children or pets out of the construction area and store products out of their reach. In case of contamination, rinse immediately with plenty of water and seek medical assistance;

● In order to ensure the ideal painting effect, please effectively separate, cover and shield the area between wood products and wall, to better maintain the cleanliness of the construction site, to avoid chaotic construction operations, please follow the construction sequence of wood paint first, to dry after the construction of latex paint.