The unique negative ion generation technology can significantly increase the negative ion content in the air and improve the quality of home air. Unique odor purification technology that releases negative ions for a long time, making the air at home fresher, just like living in a big forest. Free formaldehyde has not been detected, low in heavy metals, and has a hydrophobic and oil repellent function, ensuring that the walls are long-lasting and bright.

Characteristic:

● Continuous release of negative ions

● Delicate and smooth feel

● Purify the air and have a fresh odor

● Strong covering power

● Soothing the body and mind

● Superior anti mold and anti algae functions

● Strong scrubbing resistance

Construction method:

This product can be applied by brush, roller, or airless spraying

Purpose:

Suitable for coating surfaces of brick and stone structures, concrete, cement pressure boards, gypsum boards, etc.

Theoretical paint consumption (based on dry film 30 μ M):

12-14 square meters/liter/single pass (the actual coating area varies depending on the roughness and dryness of the substrate surface, construction methods, and dilution ratio, and the coating rate also varies).

Construction process:

● New wall: Apply two coats of putty (polishing and cleaning) → Apply one coat of alkali resistant primer (polishing and cleaning) → Apply two coats of topcoat:

● Old wall: mold removal, polishing, cleaning → one coat of alkali resistant primer (polishing, cleaning) → two coats of topcoat.

Construction instructions:

After the new wall is completely dry, it is required to have a moisture content of less than 6% and a pH value of less than 10. Use our company's alkali resistant primer (which can be diluted and stirred with an appropriate amount of water) for appropriate primer treatment. Then apply two coats of topcoat (diluted and stirred with an appropriate amount of water), and the interval between repainting should not be less than 2 hours. Construction should not be carried out when the ambient temperature is below 5 ℃ or the relative humidity is greater than 85%.

When constructing old walls, it is necessary to ensure that the walls and putty have high strength (not loose), otherwise it may cause defects such as peeling, cracking, peeling, poor leveling, and poor water resistance.

Drying time (calculated at 25 ℃):

Watch dry for 30 minutes, hard dry for 120 minutes

Recoating:

At least 2 hours apart, in case of humid weather or low temperature, the time should be appropriately extended.

Clean:

Please use clean water to clean all utensils promptly after pausing during painting and after painting is completed.

Keep in storage:

Store in a cool, dry, and ventilated place, strictly prevent freezing (not less than 0 ℃), and seal and store the remaining paint in a timely manner.

Safety precautions:

● Please carefully read the construction instructions in the product packaging and labels before use to obtain reliable and satisfactory coating results;

● Try to open all doors and windows before starting operation and use to ensure sufficient ventilation conditions in the construction area;

● If you have allergic skin, please always wear protective equipment during use; If accidentally contaminated with the eyes, please immediately rinse with plenty of water and seek medical assistance;

● Please do not allow children or pets to enter the construction area, and store the product in a place that they cannot reach; If accidentally contaminated, immediately rinse with plenty of water and seek medical assistance;

● To ensure the ideal coating effect, please effectively separate, cover, and shield the area between wooden products and walls, better maintain the cleanliness of the construction site, and avoid chaotic construction operations. Please follow the construction sequence of applying wooden paint first, drying before applying latex paint