The product does not have a pungent "paint" smell either during construction or during occupancy, providing ideal decorative effects and lasting protection for indoor walls.

Features:

●Excellent stain resistance

●Good scrub resistance

●High covering power

●Anti-mold and anti-alkali

●Large brush area and easy to apply

●Low VOC, environmental friendly and healthy

Construction method:

This product can be brushed, rolled or airless sprayed

Uses:

It is widely used for decoration and protection of concrete, cement mortar, brick wall and ceiling and other indoor grassroots.

Theoretical paint consumption:

10-12 square meters / liter / single (the actual coating area varies depending on the roughness and dryness of the substrate surface, construction method and dilution ratio).

Construction process:

●New wall: two times of putty (sanding and cleaning) → one time of anti-alkali primer (sanding and cleaning) → two times of top coat.

●Old wall: remove mildew, sanding, cleaning → anti alkali primer one time (sanding, cleaning) → top coat two times.

Construction instructions:

After the new wall is dried, the moisture content should be less than 6% and the PH value less than 10, then use our anti-alkali primer (add appropriate amount of water to dilute and stir) for proper primer treatment. Then use the top coat (add appropriate amount of water to dilute and stir) to paint two times, and the recoating interval should not be less than 2 hours. It is not suitable for construction when the ambient temperature is lower than 5℃ or the relative humidity is more than 85%.

When working on old walls, ensure that the wall surface and putty have high strength (not loose), otherwise it is easy to cause defects such as dehiscence, cracking, peeling, poor leveling and poor water resistance.

Storage method:

This product must be stored in a cool and dry place, avoiding to be placed in an environment below 2℃ or above 45℃. In the case of unopened cans, the shelf life of this product is 24 months.